diff --git a/README.md b/README.md
line changes: +4/-0
index 0000000..c13e2d4
--- /dev/null
+++ b/README.md

@@ -0,0 +1,4 @@
+# Spite Sprite
+
+This is the source data for the [Spite
+Sprite](https://dominionofawesome.com/vca/spite-sprite/).

diff --git a/case/README.md b/case/README.md
line changes: +19/-0
index 0000000..c508fd9
--- /dev/null
+++ b/case/README.md

@@ -0,0 +1,19 @@
+# Spite Sprite Case
+
+<img src="images/bottom.png" height=400>
+<img src="images/top.png" height=400>
+
+This is a case for the [Spite
+Sprite](https://dominionofawesome.com/vca/spite-sprite/). It's designed
+to allow plugging into the back of an Amiga 500. The case screws
+together with four M2.5x12 screws (though x10 will probably work too).
+
+The design accomodates the full flange of a 23 pin connector, but it
+will also work with the [3D-printable parametric D-sub
+connector](https://dominionofawesome.com/obj/parametric-dsub/).
+
+## Print recommendations
+
+The bottom of the case has a multi-layer counterbore that allows it to
+print face-up with no supports. This is designed for a layer height of
+0.2mm.